Drugasar Fire Metro 100XT Tunnel Slimline Balanced Flue Gas from Fireworld

Balanced Flue Gas Fires

Drugasar Fire Metro 100XT Tunnel Slimline Balanced Flue Gas

Drugasar Fire Metro 100XT Tunnel Slimline Balanced Flue Gas

Drugasar Fire Metro 100XT Tunnel Slimline Balanced Flue Gas
Product No: FW1957

Bookmark and Share

  • Maximum heat output 6.9Kw when using Natural Mains Gas and 6Kw when using LPG
  • Double sided glass fronted gas fire that can be viewed from both sides / different rooms
  • Up to 85% efficient
  • Battery operated temperature display remote control as standard with fully automated electronic ignition
  • Choice of either Pebbles (shown opposite) or Twigs fuel effect
  • Drugasar recommend that vents are installed in to the sides of any false chimney breasts or walls created to house this fire to prevent excessive build up up of heat (see "optional extras" below for details on the different types of vents & lighting options available)
  • Realistic flame effect
  • Glass fronted hole in the wall gas fire
  • Seamless finish with no outer trim
  • Balanced flue gas fire (BF) designed primarily for homes without a chimney or flue with access to an external wall. However a UK Chimney conversion kit is available (please read the notes section at the bottom of this page for further details about the "Bespoke Balanced flue kits" & "Chimney Conversion Kit" available at additional cost with this fire)
  • Either LPG (Liquid Propane Gas) or Natural Mains Gas
  • Depth of 432mm fully inset



Fireworld Delivery

Free Delivery!

Estimated delivery 10 working days

Need a brochure for the Drugasar Fire Metro 100XT Tunnel Slimline Balanced Flue Gas?
click fire-fireplace brochures

Please call for price
0843 155 1901


Hearth & Back | Drugasar Fire Metro 100XT Tunnel Slimline Balanced Flue Gas

Dru Metro Black H Interior
Dru Metro Black H Interior

Horizontally ribbed back
call
Dru Metro Black Smooth Interior
Dru Metro Black Smooth Interior

call


Fuel Effect | Drugasar Fire Metro 100XT Tunnel Slimline Balanced Flue Gas

Drugasar Metro 100 Slimline Pebbles
Drugasar Metro 100 Slimline Pebbles

call
Drugasar Metro 100 Slimline Twigs
Drugasar Metro 100 Slimline Twigs

call


Gas Type | Drugasar Fire Metro 100XT Tunnel Slimline Balanced Flue Gas

Drugasar Mains Natural Gas (NG)
Drugasar Mains Natural Gas (NG)

call
Drugasar Propane Gas (LPG)
Drugasar Propane Gas (LPG)

call


Controls | Drugasar Fire Metro 100XT Tunnel Slimline Balanced Flue Gas

Drugasar Remote Control (RCE)
Drugasar Remote Control (RCE)

Electronic Ignite, Thermostat and Clock Functions
call


Extras | Drugasar Fire Metro 100XT Tunnel Slimline Balanced Flue Gas

No Extras Required
No Extras Required<br>

call
Dru Flat Roof Tile
Dru Flat Roof Tile

call
Dru Universal Lead Roof Tile
Dru Universal Lead Roof Tile

for Pitched Houses
call
Dru Lux Omni Lighting Kit (QTY 2) Code 906043
Dru Lux Omni Lighting Kit (QTY 2) Code 906043

For use with brick or promatec breasts
call
Dru Lux Sleeve Vent Alu-Metallic QTY 2 Code 906048
Dru Lux Sleeve Vent Alu-Metallic QTY 2 Code 906048

For use with brick or promatec breasts
call
Dru Lux Sleeve Vent Ivory Code 906047 (2pc)
Dru Lux Sleeve Vent Ivory Code 906047 (2pc)<br />

For use with brick or promatec breasts
call
Dru Lux Omni Vent Alu-Metallic (QTY 2) Code 906045
Dru Lux Omni Vent Alu-Metallic (QTY 2) Code 906045

For use with brick or promatec breasts
call
Dru Lux Omni Vent Ivory (QTY 2) Code 906044
Dru Lux Omni Vent Ivory (QTY 2) Code 906044

For use with brick or promatec breasts
call
Dru Up & Out Standard Balanced Flue Kit (150/100)
Dru Up & Out Standard Balanced Flue Kit (150/100)

1000mm,90 degree bend,wall terminal in S/Steel
call
Dru 3 x 1000mm BF straight
Dru 3 x 1000mm BF straight

call
Dru Balanced Flue 3 Metre Chimney Conversion Kit
Dru Balanced Flue 3 Metre Chimney Conversion Kit

call
Dru Balanced Flue / Chimney Conversion Kit
Dru Balanced Flue / Chimney Conversion Kit

call
Dru NON-STANDARD-BESPOKE Flue Kit
Dru <B>NON-STANDARD-BESPOKE</b> Flue Kit

Price Dependant upon Requirements
call




Specifications | Drugasar Fire Metro 100XT Tunnel Slimline Balanced Flue Gas


External Dimensions
H346mmW1001mmD15mm
Inset Dimensions
H810/890mmW1188mmD435mm

OutPut
Maximum heat output high 6.9kW

Fire Diagram
 

Details
Contemporary double sided hole in the wall Balanced Flue gas fire

Flue
No chimney required as this fire is a balanced flue gas fire which vents up vertically then horizontally directly through an external wall. Although there is a Chimney conversion kit available (see the notes section below for further details)

VentilationAn air vent is not normally required

Notes
NOTE:The delivery service offered on this product is based on a one man only delivery. Due to the nature and weight of this product, you will need to arrange additional assistance to offload the goods from the vehicle when it arrives at your premises. Please ensure to have a survey carried out by a Gas Safe Register registered gas installer to check and certify the compatibility of your room and intended location with this fire before making any purchase to avoid disappointment Also ensure to study all the relevant information for installation of this appliance by reading the online installation & user instructions before proceeding to purchase, as we cannot accept any liability in the event that this product proves to be unsuitable for your needs or circumstances. When installing this product you will either need to construct a false chimney breast to accept the depth of the fire and line it with non combustable material or have a suitable chimney with the Dru chimney conversion kit installed in order for the fire to work correctly. Balanced flue kits are available, made up on a bespoke basis, based on your circumstances and requirements (please provide details to our sales team to obtain a price for the balanced flue kit you require). There is also a Chimney conversion kit available for standard 2 storey buildings of normal size & height to enable this fire to operate within an UK style Chimney breast, which consists of 1 short vertical flue / roof terminal, 1 flat or pitched roof tile aluminium plate, 10 metres of flexible 100mm flue pipe, 1 chimney closure plate, 1 flexible 100mm flue adaptor and 1 500mm concentric adjustable flue pipe 150/100 (NOTE: Additional flue pipe & accessories are available prices on request). This appliance comes standard with a temperature display remote control which allows the flame height to vary between high and low from your armchair with a fully automated electronic ignition. Also be aware that due to the fire producing heat the interior of the fire may become marked over time through general wear and tear which is quite normal and to be expected. The inside of the glass may also require cleaning from time to time due to condensation that may form on the inside of the glass. Due to the number of size measurements and complexity of this fire it is strongly reccomended that you have the appliance on site / in your possession to take accurate measurements from before proceeding to construct any false walls / chimney breast or creating apertures in existing brick built chimney's to avoid potential mistakes being made. For more detailed information about this product including brochure requests simply click on www.drufire.co.uk