Carron Fires Abingdon Cast Iron Combination from Fireworld

External Dimensions H see table mm W see table mm D see table mm OutPut x

Details Traditional Cast Iron Combinations

Notes

		A	B	C	D	E	F	G
Abbott		720	870	110	150	560	310	580
Abingdon		1040	1140	150	160	590	400	900
Bella		1040	1060	150	140	570	400	910
Bella Small		740	930	120	130	540	320	620
Classic		1300	1390	240	180	600	420	990
Crocus		710	1000	140	140	570	310	640
Hamden		1060	1220	200	230	600	370	900
Hawthorne		870	920	140	170	600	300	720
Jasmine		670	910	110	130	500	310	580
Jekyll		1040	1040	170	200	620	390	860
Knaresborough		990	1050	140	200	630	390	820
Lambourn		1170	1160	200	310	540	440	970
Magnum		1140	1030	180	220	640	410	940
Melrose		1100	1340	190	140	600	410	890
Morris		1060	1130	170	220	550	400	900
Oxford		900	990	130	140	500	360	750
Taj		860	1000	130	180	560	350	790
Toulouse		1110	1190	200	130	600	400	960
Tulip		880	1030	140	140	550	410	780
Tweed		1010	1020	160	240	650	420	850
Valentine		1010	1130	180	200	510	400	900
Verona		1260	1270	220	260	510	400	1070
Victorian Small		760	940	130	160	600	300	620
Victorian Large		1090	1050	170	200	580	390	920
Winchester		930	980	140	140	590	340	720

NOTE: The Hearth thickness is 50mm. Please ensure to have a survey carried out by a Gas Safe Register registered gas installer to check and certify the compatibility of your chimney or flue and or circumstances with this fire, prior to making any purchase, to avoid disappointment. This fireplace requires a class 1 chimney, class 2 prefabricated flue or Electric for homes with no chimneys, depending on the model you select. The above fires do not normally require additional ventilation in the room. Please note that all the above sizes are in millimetres (mm). Output depends on flue-pull, diameter of flue and conditions of fireplace. Ensure that the room in which the cast iron product is being installed is thoroughly dry e.g recently plastered walls cause high levels of moisture in the atmosphere and, as a result, rust is almost inevitable. Under no circumstances should a Water-based cleaner or polish be used to clean cast iron products. Moisture is prone to dropping from the chimney, and is likely to cause corrosion. to minimise this it is recommended that you have your chimney swept clean and to seek advice regarding from your Corgi or Heatas engineer regarding the installation of a chimney cowl. When using a gas fire, the products of combustion sometimes cause white deposits to form. These deposits can usually be removed with a soft brush. High temperature paint is used on all black finish items. This paint will eventually burn off. This can be maintained with our High Temperature Black paint available when purchasing the item.

All information contained in the website is to assist in your choice of a suitable fire and is not intended to rely on in full to organise your purchase. Before ordering please clarify with a suitably qualified installer to confirm suitability. If you would like further information on Solid Fuel, call the Solid Fuel Association on 0845 601 4406 or Email sfa@solidfuel.co.uk or to have a look at their website www.solidfuel.co.uk. Alternatively if you would like to find your nearest Hetas approved engineer, simply call HETAS on 0845 634 5626 or Email info@hetas.co.uk or to have a look at their Website www.hetas.co.uk where you will find a comprehensive list of engineer.

This is not intended to be all the information required to install your fire. This can be obtained from Carron themselves For more detailed information about this product visit www.Carron.uk.net.