Carron Fires Morgan Cast iron Insert from Fireworld

Dimensions A = N/A B = N/A C = N/A D = N/A E =N/A F = N/A G = N/A H = N/A I = N/A J =N/A

		A	B	C	D	E	F	G
Addison Arch		1020	1020	260	880	630	460	810
Aladdin		960	960	200	890	560	400	880
Camden		960	960	190	890	570	460	890
Celtic Arch		960	960	170	850	630	460	830
Ce Lux		960	960	180	820	650	400	740
Cherub		1100	1070	300	840	660	550	920
Daisy		960	960	200	890	560	400	870
Falkirk		960	960	160	860	640	460	850
Kensington		1100	1070	280	830	750	550	930
Laurel		1020	980	180	880	550	400	850
Morgan		960	960	180	890	580	400	880
Prince		1020	1020	260	920	630	460	810
Rococo		1100	1100	380	840	500	540	960
Royal		1020	1020	280	820	610	420	840
Royal Narrow		960	970	180	780	620	340	670
Scotia		1020	1020	220	830	640	460	820
Sherwood		960	960	200	880	580	400	880
Tiffany		960	960	240	780	660	520	730
Westminster		1100	1100	280	840	760	550	990

NOTE: The Hearth thickness is 50mm. Please ensure you have a survey carried out by a qualified Corgi registered gas installer to ensure the compatibility of your chimney / flue or intended location for a powerflue version, before making any purchase to avoid disappointment. This fireplace requires a class 1 chimney, class 2 prefabricated flue or Electric for homes with no chimneys, depending on the model you select. The above fires do not normally require additional ventilation in the room. Please note that all the above sizes are in millimetres (mm). Output depends on flue-pull, diameter of flue and conditions of fireplace. Ensure that the room in which the cast iron product is being installed is thoroughly dry e.g recently plastered walls cause high levels of moisture in the atmosphere and, as a result, rust is almost inevitable. Under no circumstances should a Water-based cleaner or polish be used to clean cast iron products. Moisture is prone to dropping from the chimney, and is likely to cause corrosion. to minimise this it is recommended that you have your chimney swept clean and to seek advice regarding from your Corgi or Heatas engineer regarding the installation of a chimney cowl. When using a gas fire, the products of combustion sometimes cause white deposits to form. These deposits can usually be removed with a soft brush. High temperature paint is used on all black finish items. This paint will eventually burn off. This can be maintained with our High Temperature Black paint available when purchasing the item.

All information contained in the website is to assist in your choice of a suitable fire and is not intended to rely on in full to organise your purchase. Before ordering please clarify with a suitably qualified installer to confirm suitability. If you would like further information on Solid Fuel, call the Solid Fuel Association on 0845 601 4406 or Email sfa@solidfuel.co.uk or to have a look at their website www.solidfuel.co.uk. Alternatively if you would like to find your nearest Hetas approved engineer, simply call HETAS on 0845 634 5626 or Email info@hetas.co.uk or to have a look at their Website www.hetas.co.uk where you will find a comprehensive list of engineer.

This is not intended to be all the information required to install your fire. This can be obtained from Carron themselves For more detailed information about this product visit www.Carron.uk.net.