Smeg L23CL Landscape Classic Flueless Gas Fire from Fireworld

Flueless Gas Fires

Smeg L23CL Landscape Classic Flueless Gas Fire

Smeg L23CL Landscape Classic Flueless Gas Fire

Smeg L23CL Landscape Classic Flueless Gas Fire
Product No: FW1737

Bookmark and Share

  • Maximum output of up to 2Kw
  • 100% efficient
  • Retro design available in different finishes in one size only
  • Dancing ribbon flame effect
  • With Glass & Stainless Steel finish
  • Glass fronted catalytic flueless wall hung portrait gas fire
  • With Oxygen Depletion Sensors & Flame Failure Device
  • Designed for homes without a chimney or flue
  • Mounts easily onto most internal walls
  • Natural gas only
  • Slimline depth of only 149mm projection into the room off the face of the wall

Fireworld Delivery

Free Delivery!

Estimated delivery 15 working days

Need a brochure for the Smeg L23CL Landscape Classic Flueless Gas Fire?
click fire-fireplace brochures

Please call for price
01244 810008


Gas Type | Smeg L23CL Landscape Classic Flueless Gas Fire

Natural Gas (NG)
Natural Gas (NG)

call


Controls | Smeg L23CL Landscape Classic Flueless Gas Fire

Manual Control
Manual Control

*Image for illustration purposes only
call




Specifications | Smeg L23CL Landscape Classic Flueless Gas Fire


External Dimensions
HSee TablemmWSee TablemmDSee Tablemm
Inset Dimensions
HSee TablemmWSee TablemmDSee Tablemm

OutPut
Maximum heat output high 2.6Kw (Dependant upon Model)

 

Details
Contemporary Flueless Gas Fire

Flue
Catalytic flueless wall mounted gas fire

VentilationSpecific to Product see Notes below

Notes

Hang On the Wall Flueless Fires
NameHeightWidthDepth
Smeg L23CL Landscape Classic480702149
Smeg L23LIN Landscape Linear482702149
Smeg L30FAB Retro550800186
Smeg P23LIN Portrait Linear590526149
Smeg P23CL Portrait Classic590526149


NOTE: Please note that all the above sizes are in millimetres (mm). NOTE: Please ensure to have a survey carried out by a Gas Safe Register registered gas installer to check and certify the compatibility of your intended location and circumstances with this fire before making any purchase to avoid disappointment. Retro Range This Fire should not be installed in a room smaller than 30m³ with built in ventilation of at least 100cm² and an openable window. Linear & Classic Range This Fire should not be installed in a room smaller than 23m³ with built in ventilation of at least 100cm² and an openable window. Also note that this fire cannot be installed in a bathroom or bedroom. It is recommended that this fire should not be used as a sole source of heat rather as a secondary source in conjunction with central heating. Clearance Min of 100mm to each side, 800mm to ceiling, 500mm to the front of the fire and at least 60mm from the floor. Please be aware that traditional materials, such as polished steel and brass, tarnish on contact with air, especially when exposed to heat. To help contain this to a minimum, we recommend products receive regular treatments with suitable cleaners and polishes. All information contained in the website is to assist in your choice of a suitable fire. This is not intended to be all the information required to install your fire. This can be obtained from Smeg themselves.

For more detailed information about this product visit www.smeguk.com.