More Gas Basket Fires
Gallery Cottage Gas Basket Fire
Product No: FW1641
Estimated delivery 10 working days
email a friend
OutPutPlease Note: No heat output figures are available from the manufacturer of this gas fire, which would indicate that this appliance is suitable for decorative purposes only and should not be relied upon as a source of heat!
DetailsContemporary & Classic Gas Basket Fires
FlueSuitable for class 1 chimney's or flue systems with a minimum internal diameter of 7" or more
NOTE: Please ensure to have a survey carried out by a Gas Safe Register registered gas installer to check and certify the compatibility of your chimney or flue with this fire before making any purchase to avoid disappointment. Additional ventilation is not normally required within the proposed room of installation when installing this product. It is reccomended that this fire should not be used as a sole source of heat rather as a secondary source in conjunction with central heating. Please note that whilst soot deposits on a gas fire are quite normal and to be expected, they will be more visable on a pebble, firewood or driftwood fuel effect. The remote control option available with this fire, allows the flame height to vary between high and low from your armchair once the pilot has been ignited manually, although the pilot can be left on once lit, throughout the year for your convenience or as required.
Ensure that the room in which the Basket product is being installed is thoroughly dry e.g recently plastered walls cause high levels of moisture in the atmosphere and, as a result, rust is almost inevitable. Under no circumstances should a Water-based cleaner or polish be used to clean gallery basket products. Moisture is prone to dropping from the chimney, and is likely to cause corrosion. To minimise this it is recommended that you have your chimney swept clean and to seek advice from your Gas Safe Register engineer regarding the installation of a chimney cowl. When using a gas fire, the products of combustion sometimes cause white deposits to form. These deposits can usually be removed with a soft brush. High temperature paint is used on all black finish items. This paint will eventually burn off. This can be maintained with our High Temperature Black paint available when purchasing the item.
This is not intended to be all the information required to install your fire. This can be obtained from Gallery Fireplaces themselves For more detailed information about this product visit www.galleryfireplaces.co.uk.
© 1999 - 2016 Fireworld for:gas fires | electric fires