Drugasar Fire Paco Balanced Flue Gas from Fireworld

Balanced Flue Gas Fires

Drugasar Fire Paco Balanced Flue Gas

Drugasar Fire Paco Balanced Flue Gas

Drugasar Fire Paco Balanced Flue Gas
Product No: FW1660

Bookmark and Share

  • Battery operated remote control as standard
  • Maximum heat output 5.3kW
  • Up to 79% efficient
  • Full electronic ignition
  • Realistic flame effect
  • Glass fronted hole in the wall gas fire
  • Metal interior lining
  • Balanced flue gas fire (BF) designed primarily for homes without a chimney or flue with an immediate external wall. However a UK Chimney conversion kit is available (please read the notes section at the bottom of this page for further details about the "Standard Balanced flue kit" & "Chimney Conversion Kit" available at additional cost with this fire)
  • Natural Gas Only
  • Depth of 546mm fully inset


Fireworld Delivery

Free Delivery!

Estimated delivery 10 working days

Need a brochure for the Drugasar Fire Paco Balanced Flue Gas?
click fire-fireplace brochures

Please call for price 01244 810008

Options | Drugasar Fire Paco Balanced Flue Gas

Dru Paco Inset Model
Dru Paco Inset Model
call
Dru Paco Outset Model
Dru Paco Outset Model
call

Finishes | Drugasar Fire Paco Balanced Flue Gas

Dru Alu Metallic
Dru Alu Metallic

Drugasar
call
Dru Anthracite
Dru Anthracite

Drugasar
call

Fuel Effect | Drugasar Fire Paco Balanced Flue Gas

Drugasar Logs
Drugasar Logs

call

Gas Type | Drugasar Fire Paco Balanced Flue Gas

Drugasar Mains Natural Gas (NG)
Drugasar Mains Natural Gas (NG)

call

Controls | Drugasar Fire Paco Balanced Flue Gas

Drugasar Remote Control
Drugasar Remote Control

With Temperature Display
call

Extras | Drugasar Fire Paco Balanced Flue Gas

No Extras Required
No Extras Required<br>

call
Dru Flat Roof Tile
Dru Flat Roof Tile

call
Dru Universal Lead Roof Tile
Dru Universal Lead Roof Tile

for Pitched Houses
call
Dru Paco Iron Lintel
Dru Paco Iron Lintel

call
Dru Lux Omni Lighting Kit (QTY 2) Code 906043
Dru Lux Omni Lighting Kit (QTY 2) Code 906043

For use with brick or promatec breasts
call
Dru Lux Sleeve Vent Alu-Metallic QTY 2 Code 906048
Dru Lux Sleeve Vent Alu-Metallic QTY 2 Code 906048

For use with brick or promatec breasts
call
Dru Lux Omni Vent Alu-Metallic (QTY 2) Code 906045
Dru Lux Omni Vent Alu-Metallic (QTY 2) Code 906045

For use with brick or promatec breasts
call
Dru Lux Omni Vent Ivory (QTY 2) Code 906044
Dru Lux Omni Vent Ivory (QTY 2) Code 906044

For use with brick or promatec breasts
call
Dru Up & Out Standard Balanced Flue Kit (150/100)
Dru Up & Out Standard Balanced Flue Kit (150/100)

1000mm,90 degree bend,wall terminal in S/Steel
call
Dru 3 x 1000mm BF straight
Dru 3 x 1000mm BF straight

call
Dru Balanced Flue / Chimney Conversion Kit
Dru Balanced Flue / Chimney Conversion Kit

call
Dru NON-STANDARD-BESPOKE Flue Kit
Dru <B>NON-STANDARD-BESPOKE</b> Flue Kit

Price Dependant upon Requirements
call



Specifications | Drugasar Fire Paco Balanced Flue Gas


External Dimensions
H660mmW450mmDN/Amm
Inset Dimensions
H1075/1135mmW546mmD546mm

OutPut
Maximum heat output high 5.3Kw (NG)

Fire Diagram
 

Details
Contemporary Hole in the wall Balanced Flue Gas Fire with optional Chimney conversion kit

Flue
No chimney required as this fire is a balanced flue gas fire which vents up vertically then horizontally directly through an external wall. Although there is a Chimney conversion kit available (see the notes section below for further details)

VentilationAn air vent is not normally required

Notes



NOTE:The delivery service offered on this product is based on a one man only delivery. Due to the nature and weight of this product, you will need to arrange additional assistance to offload the goods from the vehicle when it arrives at your premises. Please ensure to have a survey carried out by a Gas Safe Register registered gas installer to check and certify the compatibility of your room and intended location with this fire before making any purchase to avoid disappointment Also ensure to study all the relevant information for installation of this appliance by reading the online installation & user instructions provided by Drugasar at www.drufire.co.uk before proceeding to purchase, as we cannot accept any liability in the event that this product proves to be unsuitable for your needs or circumstances. When installing this product as a balanced flue on an immediate external wall you will also need to to construct a false chimney breast to house the depth of the fire and line it with non combustable material. The standard balanced flue kit supplied with the fire consists of 1 1000mm length, 1 90 degree bend and 1 wall flue terminal kit. The 1000mm length comes off the top of the fire and raises up vertically before venting horizontally at 90 degrees through the thickness of a standard external wall. However there is a Chimney conversion kit available for standard 2 storey buildings of normal size & height to enable this fire to operate within an UK style Chimney breast, which consists of 1 short vertical flue / roof terminal, 1 flat or pitched roof tile aluminium plate, 10 metres of flexible 80mm flue pipe, 1 chimney closure plate, 1 flexible 80mm flue adaptor and 1 500mm concentric adjustable flue pipe 150 / 80 (NOTE: Additional flue pipe & accessories are available prices on request). This appliance also comes standard with a temperature display remote control which allows the flame height to vary between high and low from your armchair with an electronic ignition system straight from the handset without the need to manually light the pilot first. Also be aware that due to the fire producing heat the interior of the fire may become marked over time through general wear and tear which is quite normal and to be expected. The inside of the glass may also require cleaning from time to time due to condensation that may form on the inside of the glass. Due to the number of size measurements and complexity of this fire it is strongly reccomended that you have the appliance on site / in your possession to take accurate measurements from before proceeding to construct any any false walls or chimney breast to avoid potential mistakes being made. For more detailed information about this product including down loadable technical user & installation instructions, simply click on the customer services heading at the top of this page, then click brochures and scroll down to Drugasar where you can link directly to their website or alternatively you can email a request for a brochure.