Valor Fires Icon Hole in the Wall Gas Fire from Fireworld

External Dimensions H 622mm W 631mm D 64mm Inset Dimensions H 555mm W 405mm D 235mm OutPut Maximum heat output high 4Kw low 1.3Kw (NG) Heat input high 6.85Kw low 2.7Kw (NG) Heat output high 3.9Kw low 2.2Kw (LPG) Heat input high 6.7Kw low 4.3Kw (LPG)

Flue Suitable for class 1 chimneys, class 2, prefabricated* & precast flues.** Ventilation An air vent is not normally required

Notes
NOTE: Please ensure to have a survey carried out by a Gas Safe Register registered gas installer to check and certify the compatibility of your chimney or flue with this fire before making any purchase to avoid disappointment. **If you intend to install this fire into a precast flue then an optional extra spacer kit (prices available on request) and or a deep rebated or false chimney breast will be required. *Also due to the sheer number of varying flue boxes it is not possible to know which fires are suitable until such time as the exsisting fire has been removed. Please note that whilst soot deposits on a gas fire are quite normal and to be expected, they will be more visable on a pebble fuel effect and or a light coloured fireback. Also be aware that due to the fire producing heat the interior backing to the fire may become marked over time through general wear and tear. All information contained in the website is to assist in your choice of a suitable fire. This is not intended to be all the information required to install your fire. This can be obtained from Valor themselves

For more detailed information about this product visit www.valor.co.uk